Powder coated aluminum patio furniture requires little in the way of maintenance, yet can still present some challenges to keeping it looking its best. Cleaning aluminum is relatively straightforward but requires some common household supplies and an appropriate location in which to complete this task.
As the first step of furniture cleaning, it is necessary to do a basic rinse of the piece to rid itself of dirt and debris. After this has been accomplished, use non-abrasive mild detergent solution with cloth for surface cleaning of furniture surfaces.
Cleaning
Aluminum furniture is known for being extremely long-lasting and resilient against all climates; however, improper care or cleaning could damage its surface. To preserve powder coated aluminum furniture’s finish and avoid potential scratches or damages to its finish, regular care and maintenance of its surface must be carried out using nonabrasive cleaners that won’t scratch or harm its finish, such as using damp cloth or soft sponge to wipe down the surface.
Along with regular cleaning, metal should also be rinsed and dried regularly to help avoid rust forming on its surface and maintain a gleaming finish. An important rule for cleaning aluminum is never using steel wool – this can leave scratches that show through its protective powder coating and leave behind lasting traces in its place! To properly scrub aluminum before rinsing it off with water.
Commercial-grade aluminum is generally resistant to rust, with further increased resilience when coated in powder coat. Jensen Outdoor furniture features powder-coated aluminum for superior resistance against rust development over time; however, this doesn’t prevent dirt or discoloration over prolonged use of your outdoor furnishings.
If your patio furniture has become discolored, one of the quickest and easiest ways to restore it is soaking it in mild liquid detergent in warm water for several minutes before thoroughly rinsing off and rinsing with clean water afterwards. If necessary, scrub with a damp sponge or rag to loosen any stuck-on dirt or debris before rinsing again.
Keep your aluminum patio furniture looking its best by performing routine cleaning sessions every week. This process should only take 30 minutes and will protect it from becoming dull or discolored over time. To simplify your task of keeping it looking its best, purchase a non-abrasive liquid cleaner specifically made for powder-coated aluminum; such products can usually be found at hardware stores without damaging its coating.
Polishing
Aluminum patio furniture is durable enough to withstand weathering and use, but over time can become scratched or faded. Regular cleaning with mild soap and water is the best way to keep powder coated aluminum patio furniture looking its best; additionally, applying car wax once every year should further protect its finish against oxidation or other forms of damage.
When cleaning powder coated aluminum furniture, always follow the manufacturer’s instructions for your particular product. Abrasive materials like steel wool could scratch its finish; additionally, be sure to rinse your furniture properly so as to eliminate any soapy residue left behind.
Powder coated aluminum surfaces are easy to keep clean, but regular upkeep is recommended to prevent the accumulation of dirt and grime. A mild soap solution or commercial cleaner designed specifically for powder coated aluminum surfaces should suffice in keeping it looking its best.
After clearing away large debris from your aluminum furniture, use a soft brush with detergent and water solution to gently scrub its surface using circular movements. Rinse and dry using a cloth or towel; repeat as necessary until your aluminum furniture looks shiny and new again.
If your furniture has scratches or dull spots, using metal polish or paste wax can help you buff them away. Be sure to only buff affected areas; use soft nonabrasive cloth and don’t press too hard. Once completed, the scratch should become nearly unnoticeable.
Store aluminum patio furniture indoors when not in use to protect it from direct sunlight and rain, thieves and vandals as well as prevent thefts or vandalism. If there’s no place available, a protective cover should suffice in protecting against rain, dirt and dust.
Powder coating may be tougher than paint, but it still wears down over time. To preserve its appearance for as long as possible and keep metal from oxidizing, regular cleaning and polishing as well as protecting with car wax should be performed to keep powder coated furniture looking its best for years.
Waxing
Once a year, as well as dusting powder coated aluminum patio furniture, you should also apply car wax. This will preserve its color while also protecting it from moisture-induced oxidation that can take place due to being exposed in the air. By taking this simple step you can keep your patio furniture looking its best for years!
Before beginning cleaning aluminum furniture, ensure you have all of the required supplies on hand. These should include warm water in a bucket, mild liquid detergent and soft cloths or sponges (ideally one without solvents or petroleum-based chemicals that could damage its surface) along with soft brushes for hard-to-reach areas.
As soon as you have the necessary equipment, you can begin scrubbing away dirt and grime from your furniture. Starting with the soft surfaces such as armrests or backs of chairs, gradually move up towards harder parts such as legs and corners using gentle pressure and avoid too forceful of an approach, which could damage its powder coating.
Once you’ve scrubbed those hard-to-reach areas, rinse off your furniture in a bucket of clean, warm water until its waters have cleared completely before drying it with a soft cloth or sponge. Finally, after everything is dry you can add car wax for protection from oxidation and to give a beautiful shine.
Covering aluminum patio furniture when not in use is another effective way of protecting it, as this will prevent it from becoming dirty and dusty from being exposed to elements such as rain, wind and sunlight and help ensure its security from thieves and vandals.
While cleaning aluminum furniture may seem complicated, the process is actually fairly straightforward and should take no longer than necessary to complete. By employing appropriate tools and techniques you’ll ensure that your aluminum patio furniture stays looking its best for years.
Sealing
Powder coated aluminum furniture may be durable and weatherproof, yet still become dull and dirty over time. Routine cleaning with mild soap and water solutions or by rinsing with the hose can keep your furniture looking its best for years. For tougher stains or spots on aluminum patio furniture you may require specific cleaners designed specifically for it, as these must be rinsed off thoroughly to avoid leaving residue behind.
Avoid cleaning products or materials that could scratch the powder coating on your patio furniture as this could leave unattractive marks that damage its surface and leave lasting blemishes. Also, it would be prudent to store aluminum patio furniture indoors during winter months to protect it from excessive sun exposure.
If you notice scuff marks on your powder coated aluminum furniture, non-abrasive metal polishing agents or white vinegar and warm water could help. However, if they persist beyond these treatments then steel wool or coarse sandpaper might need to be used on them before applying a clear coat spray paint over the furniture and waiting until it dries completely before adding another clear coat spray paint layer over top of that.
Use car wax on powder coated aluminum furniture is another effective way of keeping it looking brand new, as this will prevent oxidation from taking place and protect it for many years to come. A high quality car wax will seal and shine your furniture so it appears brand new!
Powder coated aluminum patio furniture adds beauty to any outdoor space, but over time can become dull and dirty. By following these easy steps you can quickly eliminate dirt build-up on your furniture so it looks brand new again. Also keeping it covered when not being used will extend its longevity as new looking.
